20% popusta na sve SNOW artikle iznad 100€!
Proljetno buđenje!
20% popusta na sve nove artikle iznad 100€!
Proljetno buđenje!
Proljetno buđenje! Danes ostvarite 20% dodatnega popusta na već snižene SNOW artikle za kupnju iznad 100€!
Proljetno buđenje! Danes ostvarite 20% dodatnega popusta na sve artikle za kupnju iznad 100€!

TESLA/T1 SECOND BOARD KIT

Oprostite - ovaj proizvod nije više dostupan.

SKU:
Odabrana boja:
Tablica veličina
Odaberite veličinu:
Dostava i povrat
Predviđena dostava SLO i HR: 02.04.2024
Predviđena dostava ostale EU države: 05.04.2024
SPARK R&D TESLA/T1 SECOND BOARD KIT

Set up multiple splitboards to be tour-ready with Tesla System (Magneto & AfterBurner) or Tesla T1 System bindings (Arc, Surge, Women’s Arc, & Women’s Surge). Comes with the universal Tesla touring brackets, both Tesla & T1 Heel Rests, and screws.
Pair it up with Spark Pucks or a Voile Puck Only Kit and you’re ready to ride!

Setup Instructions:
• Using the Yellow Patched screws, attach the Tesla Touring Brackets to your board. Be sure to only use the Yellow Patched screws with the Tesla Touring Brackets.
• Using the Blue Patched screws, attach the Tesla or T1 Heel Rests with the arrows pointing toward the nose of your board. Be sure to only use the Blue Patched screws with the Tesla or T1 Heel Rests.

NOTE:
• If you have a Factory Split: Use the screws provided to attach the touring brackets and heel rests. The heel rests are oriented so that the arrow points toward the tip of your board.
• If you have a DIY Split: You will need to use 5.5 x 11.5 mm ski screws for the heel rests. Ski screws used with Voile climbing heels are too long and will bubble your base. If you need these shorter screws and cannot find them locally, please contact us.

Povezani proizvodi

visa
maestro
mastercard
verified by visa
mastercard securecode
dpd
pošta