20% popusta na vse SNOW artikle nad 100€!
Spomladansko prebujanje!
20% popusta na vse nove artikle nad 100€!
Brezplačna dostava nad 100€!
Spomladansko prebujanje! Danes pridobi 20% dodatnega popusta na nove in že znižane SNOW artikle pri nakupu nad 100€!
Izkoristi brezplačno poštnino za naročila v Slovenijo nad 100€
Spomladansko prebujanje! Danes pridobi 20% popusta na vse nove artikle pri nakupu nad 100€!
Izkoristi brezplačno poštnino za naročila v Slovenijo nad 100€

HOFFART VATO OP 54

Ta izdelek ni več na voljo

Koda:
Izbrana barva:
Tabela velikosti
Izberi velikost:
Dostava in vračila
Predvidena dostava SLO in HR: 02.04.2024
Predvidena dostava ostale države EU 05.04.2024
BONES WHEELS STF Pro Hoffart Team Vato Op 54mm Wheels 4pk

Specifications
SKU WPCAJHTVO5403W4
Brand BONES WHEELS
Wheel Core No
Wheel Diameter 54mm
Wheel Width 34mm
Wheel Hardness 83B
Wheel Formula STF
Wheel Color White
Wheel Suggested Use Street
Wheel Surface Treaded
Wheel Shape V4
About Street Tech Formula™ (STF)

Street Tech Formula™ (STF) is specifically engineered from top quality components to obtain all the best properties necessary for the ultimate in street wheel performance.

BONES® WHEELS has created a wheel with a substantially higher rebound for more speed and amazing slide capabilities while maintaining a resistance to flat spotting well beyond any standard wheel. The technology behind STF is proven. The results speak for themselves.

Hype is hype, “quality” is for real. Try Street Tech Formula™ wheels on your next setup and see for yourself.
About DUROMETER B SCALE

Shore Durometer A Scale is good, but it does not cover the entire range of skate wheel hardness and is very limited because the scale goes from 1 to 100 and anything over A 95A does not compute accurately.

Shore Durometer B Scale is perfect for skate wheels because:

It is very similar to the A Scale, but reads 20 points lower, allowing the useful scale to be extended by 20 points, which covers the entire hardness range of skate wheels in one scale. It uses the same soft spring as the A Gauge, but the conical gauge needle of the D Scale.
Because the spring is soft, the B Scale gauge needle does not puncture the skin of the wheel surface, resulting in the same reliable reading as the A Scale does.

Shore Durometer D Scale is designed for hard rubbers and rock hard urethanes, not soft, bouncy urethanes that are used in skate wheels. It has a very stiff spring behind its sharp conical needle and often punctures the skin of the wheel being measured, this resulting in 5-10 points softer reading than is correct. Thus, Shore D Scale should not be used for wheels in the useful skate wheel range.

Zraven paše

visa
maestro
mastercard
verified by visa
mastercard securecode
dpd
pošta