20% popusta na vse SNOW artikle nad 100€!
Spomladansko prebujanje!
20% popusta na vse nove artikle nad 100€!
Brezplačna dostava nad 100€!
Spomladansko prebujanje! Danes pridobi 20% dodatnega popusta na nove in že znižane SNOW artikle pri nakupu nad 100€!
Izkoristi brezplačno poštnino za naročila v Slovenijo nad 100€
Spomladansko prebujanje! Danes pridobi 20% popusta na vse nove artikle pri nakupu nad 100€!
Izkoristi brezplačno poštnino za naročila v Slovenijo nad 100€

HOFART DROPS V1 53

Ta izdelek ni več na voljo

Koda:
Izbrana barva:
Tabela velikosti
Izberi velikost:
Dostava in vračila
Predvidena dostava SLO in HR: 02.04.2024
Predvidena dostava ostale države EU 05.04.2024
BONES STF Pro Hart Drops 53x31 V1 Skateboard Wheel 83B 4pk

Specifications
SKU WPCAPH0035303W4
UPC 842357107113
Brand BONES WHEELS
Wheel Core None
Wheel Diameter 53mm
Wheel Width 31mm
Wheel Hardness 83B = 103a
Wheel Formula STF
Wheel Color White
Wheel Suggested Use Street
Wheel Surface Treaded
Wheel Shape V1

Details

About Street Tech Formula™ (STF)

Street Tech Formula™ (STF) is specifically engineered from top quality components to obtain all the best properties necessary for the ultimate in street wheel performance.

BONES® WHEELS has created a wheel with a substantially higher rebound for more speed and amazing slide capabilities while maintaining a resistance to flat spotting well beyond any standard wheel. The technology behind STF is proven. The results speak for themselves.

Hype is hype, “quality” is for real. Try Street Tech Formula™ wheels on your next setup and see for yourself.

About DUROMETER B SCALE

Shore Durometer A Scale is good, but it does not cover the entire range of skate wheel hardness and is very limited because the scale goes from 1 to 100 and anything over A 95A does not compute accurately.

Shore Durometer B Scale is perfect for skate wheels because:

It is very similar to the A Scale, but reads 20 points lower, allowing the useful scale to be extended by 20 points, which covers the entire hardness range of skate wheels in one scale. It uses the same soft spring as the A Gauge, but the conical gauge needle of the D Scale.
Because the spring is soft, the B Scale gauge needle does not puncture the skin of the wheel surface, resulting in the same reliable reading as the A Scale does.
Shore Durometer D Scale is designed for hard rubbers and rock hard urethanes, not soft, bouncy urethanes that are used in skate wheels. It has a very stiff spring behind its sharp conical needle and often punctures the skin of the wheel being measured, this resulting in 5-10 points softer reading than is correct. Thus, Shore D Scale should not be used for wheels in the useful skate wheel range.

Satisfaction Guaranteed

All BONES WHEELS manufactured products are warranted against manufacturing defects for the useful life of the product. If you feel your skateboard wheels, bushings, or other BONES WHEELS products were defective, you may send it back to us, freight prepaid. We will inspect it and let you know of our findings. If we decide your returned product was defective or failed to give reasonable service, we will replace that product with a similar, available product of the same or better quality and pay for the shipping back to you. You can send in multiple products to be inspected for your return. We will evaluate each product separate and will replace any and all products found to be defective.

About BONES WHEELS

Product Performance: Many skaters assume the performance and quality of skate wheels are all the same. A wheel is a wheel is a wheel, they might often say. That's actually not the case. In fact, very large differences exist between the raw materials, manufacturing process, quality control and performance of different wheel brands. Up until now though, a wheel's reputation has been a combination of market hype, market muscle, skater support and word of mouth. Bones wheels popularity is largely a result of superior quality, performance and durability.

Real Value: BONES may not be the lowest-priced wheel, but our abrasion test chart shows why Bones is the best value. After all, what good is a cheaper wheel if it flat spots the first day? BONES wheels offer the best combination of product performance, durability, quality, and customer service available today. In other words, you might be able to find a lower price, but never a better value.

Our Strength: All BONES WHEEL unique formulas are solely developed and produced in our own manufacturing plant located in Santa Barbara, CA. Using drastically different physical and engineering properties for each formula, BONES creates unique urethanes for specific applications of skateboarding.

Zraven paše

visa
maestro
mastercard
verified by visa
mastercard securecode
dpd
pošta